Products
Contact Us
- The Contact : Bruno Gao
- Tel / Whatsapp : +86 15511630149
- Address : ZhaoLong Road NO. 131, Zhenhai, NingBo, ZheJiang Province China
- Email : gaoxing90@hotmail.com
- Website : www.nbhaiqiang.com
Your Position: Home > Products > TPU injection machine >
HQT-1680 TPU injection molding machine
HQT-1680 injection molding machine sold to Middle East customer of LED luminations.
HQT-J serie High Precision Injection Machine
—— Adopt motor and pump of large power, increasing injection speed and precision.
—— Improved oil circuit , enables quick and accurate response of action
—— Special screw with excellent plasticizing capacity, guarantees the best moulding effect.
—— Various unique designs meet perfectly the requirements of fabrication such as high precision, short forming time, thin wall ect.
Product Show ( widely used in electric gadget industry such as cellphone cases ect. )
| Item | Unit | HQT1680 | ||
| INJECTION UNIT | ||||
| Screw Diameter | mm | 40 | ||
| Screw L/D Ratio | L/D | 22.5 | ||
| Shot Volume(Theoretical) | cm3 | 276 | ||
| Injection Weight(PS) | g | 252 | ||
| Plasticizing Capacity(PS) | g/s | 15.8 | ||
| Injection Rate | g/s | 106 | ||
| Injection Pressure | Mpa | 215 | ||
| Screw Speed | r/min | 149 | ||
| CLAMPING UNIT | ||||
| Clamp Tonnage | KN | 1680 | ||
| Toggle Stroke | mm | 420 | ||
| Space Between Tie Bars | mm | 460×460 | ||
| Max.Mould Height | mm | 500 | ||
| Min.Mould Height | mm | 180 | ||
| Ejector Stroke | mm | 120 | ||
| Ejector Tonnage | KN | 38 | ||
| Ejector Number | pc | 5 | ||
| OTHERS | ||||
| System Pressure | Mpa | 16 | ||
| Pump Motor Power | KW | 15 | ||
| Heater Power | KW | 9.3 | ||
| Machine Dimension(L×W×H) | m | 4.74×1.49×1.9 | ||
| Oil Tank Capacity | L | 312 | ||
| Machine Weight | T | 5.5 | ||
Related Tags : TPU PC injection machine
Previous : HQT-1500 TPU injection molding machine Next : HQT-1280 TPU injection molding machine